Asphalt Mixing Plant

• Ruggedly designed M.S. Structure chases and M.S. Plate hopper body.
• Auxiliary conveyor with AC/DC variable speed drive under each bin.
• Option of oversize vibrator with drive - under each bin or common provided at discharge of collecting conveyor.
• Hopper body vibrator for sand and fines bin/s.
• Provision for add-on capacity by hopper extension.
• Weighing sensor (Load Cell) provided at discharge end of collecting conveyor.

• Ruggedly designed chases with adjustable jacklegs for slop setting.
• Insulated Dryer Drum gives higher fuel efficiency and reduces heat losses.
• Circumferential chain drive offers smooth and power efficient dryer drive with less torque and wear on gearbox.
• Drive system of fluid coupling with gearbox ensures easy restart of dryer unit in fully loaded condition.
• Sweep rotor ensures smooth and uniform discharge of mix.
• Multi cone dust collector with dust out late screw and fines re-feeding arrangement.
• SHR (Super Heat Resistive - 210°C) grade conveyor belt of joint less molding provided in mix discharge (load out) conveyor offers longer life for handling mix asphalt.
• Bigger capacity discharge hopper reduces segregation level in charging mix asphalt in to the dumper/tipper for canal, road and runways use.

• Two nozzles type pressure jet burner with high-low intensity offers higher fuel efficiency.
• PHF (Pumping, Heating & Filtering) unit facilitate pre-heating of fuel for higher efficiency.
• Can be operated both in auto and manual mode directly from control panel.
• Automatic temperature controls against required preset temperature.
• Inter locking with exhaust and air blower operation with sequence control ensures safety against backfire and gives smooth operation.

• Rugged construction from M.S. Plate with necessary charging and discharge attachment with air vent for safe storage and supply of fuel.

• Fully insulated tank body offers minimum heat losses.
• Two way heating coil designed ensures fast and efficient heating process.
• Easy for heating coil cleaning and maintenance process.
• Jacketed bitumen pump station avoids jamming of pump operation.
• Thermic fluid system with tank and pumping unit for complete bitumen line for non-clogging of bitumen supply system.
• Fully automatic pressure jet burner offers faster and efficient heating of bitumen and automatic temperature control from panel.
• Additional start-up panel facilitate individual heating process by burner operation without starting main control panel low operating cost.